Every Omnipure filter undergoes rigorous testing and independent verification for performance. Each filter is rates at .5 gpm with a maximum pressure of 125 psi and a maximum temperature of 100 degrees F. Chlorine reduction Class 1.
|Description Application||Model Number||Filter Length||Volume Cubic Inch||Service Life Gal. or 1 year||Degree of Nominal Filtration||Pipe Size NPT||Reduction Class|
|Taste and odor reduction down to 10 microns. Granular activated Carbon||CL6ST T28/T36||6”||8.3||1000||10 microns||1/8, 1/4, 3/8||1||CL10ST T28/T36||10”||16.6||1500||10 microns||1/8, 1/4, 3/8||1||CL6ST T33/T40||6”||8.3||1000||10 microns||1/8, 1/4, 3/8||1||CL10ST T33/T40||10”||16.6||1500||10 microns||1/8, 1/4, 3/8||1|
|Dirt, sand and sediment removal. Polypropylene depth filtration. Filters down to 5 microns.||CL6PF5*||6”||NA||NA||5 microns||1/8, 1/4, 3/8||2||CL10PF5*||10”||NA||NA||5 microns||1/8, 1/4, 3/8||2||CL6PF25*||6”||NA||NA||25 microns||1/8, 1/4, 3/8||NA||CL10PF25*||10”||NA||NA||25 microns||1/8, 1/4, 3/8||NA|
|Taste and odor reduction. Specifically designed for RO or distillation units. Granular activated carbon.||CL6RO T28/T36||6”||8.3||1000||5 microns||1/8, 1/4, 3/8||1||CL10RO T28/T36||10”||16.6||1500||5 microns||1/8, 1/4, 3/8||1||CL6RO T33/T40||6”||8.3||1000||5 microns||1/8, 1/4, 3/8||1||CL10RO T33/T40||10”||16.6||1500||5 microns||1/8, 1/4, 3/8||1|
|Taste and odor reduction. Equipment scaling protection.||SCL6||6”||8.3||750 gal. or 6 months||10 microns||1/8, 1/4, 3/8||1||SCL10||10”||16.6||1250 gal. or 6 months||10 microns||1/8, 1/4, 3/8||1|
|Lead, taste, odor and chlorine reduction. GAC and lead specific media.||CL10HP||10”||16.6||500||10 microns||1/8, 1/4, 3/8||NA|
* Item is not currently listed with NSF
Test Information: The CL-Series filter housing and fittings have been tested for performance under NSF Standard 42. Tests included Hydro Static Testing at 300 psig and Cycle Testing of 100,000 repetitions from 0 to 150 psig. Complete test results are available from OMNIPURE. Omnipure products have been tested and listed under Standard 42 for taste, odor and chlorine reduction; or particulate reduction; or have been materials certified. All filters should be installed on cold water lines only. NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit
Warranty Information: Omnipure Filter Company (Omnipure) warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation or 5 years from the date of manufacture whichever occurs first, beyond which time or use Omnipure is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product. There are no other warranties, either merchantability or fitness, either expressed or implied.
The Best Inline Water Filter in the World... Pure and Simple.